![](https://hauntproject.com/wp-content/uploads/2024/01/cald01.jpg)
First we cut the barrel its just an ordinary rain barrel but as you can tell it had a few cracks in it they needed to be repaired with some apoxy
![](https://hauntproject.com/wp-content/uploads/2024/01/cald02.jpg)
Next I drilled a hole in the top of my bucky skull when the mold seemed to be filled from
![](https://hauntproject.com/wp-content/uploads/2024/01/cald03.jpg)
Next I painted the barrel black it only took one can of paint
![](https://hauntproject.com/wp-content/uploads/2024/01/cald04.jpg)
I attached the skulls and then tested it with the fog machine inside. The fog machine just sits inside the barrel for easy removal after Halloween is over
![](https://hauntproject.com/wp-content/uploads/2024/01/cald05.jpg)
Then I added a red spot and turned off the lights
![](https://hauntproject.com/wp-content/uploads/2024/01/finalcald.jpg)
Here is a picture of final project sitting on the front line